OCB Logo Ohio Carbon Blank
OCB Top Menu
OCB Animation
 
   
 
 
 
Home Contact Us Sitemap
 

Graphite MSDS

  MATERIAL SAFETY DATA SHEET

  IDENTIFICATION  
  Product: Carbon of Graphite, Various Grades
  Chemical Family: Carbon
  DOT Hazard Class: Inert

1. INGREDIENTS/COMPOSITION (INERT & HAZARDOUS)
  Carbon / Synthetic Graphite
  CAS#: 7440-44-0/7782-42-5
  Percent: 100%
  TLV: 10 mg/M3
  PEL: 15 mg/M3

2. PHYSICAL DATA
  Boiling Point: None
Melting Point: None
  Evaporation Rate: None
Solubility in Water: Insoluble
  Appearance: Grey/Black Solid
Specific Gravity: 1.9 - 2.2
  Odor: None
Vapor Density: 0.1%
  Vapor Pressure: Negligible at R.T.
Volatiles by Weight: Negligible at R.T.

3. HEALTH HAZARD DATA  
  Primary Route(s) of Entry: Inhalation of Dust.
  Effects of Overexposure: None. These products are generally in solid form and do not generate any dust unless forcibly altered - as in a machining process. If dust from the product is present, prolonged or repeated, breathing of the dust may cause benign pneumoconiosis.

4. EMERGENCY & FIRST AID PROCEDURES
  Eyes: Flush with water if irritation from dust occurs
  Skin: None necessary

5. FIRE & EXPLOSION DATA  
  Flash Point: None
  Upper/Lower Explosive Limits: None
  Extinguishing Media: Water, CO2, Sand
  Extinguishing Media to Avoid: None
  Hazardous Decomposition Products: In normal combustion, CO2 and CO
  Unusual Fire & Explosive Hazards: None

6. REACTIVITY DATA  
  Stability: Stable
  Hazardous Polymerization: Will not occur
  Incompatibility (Materials to Avoid): None

7. SPILL OR LEAK PROCEDURES
  Steps will be taken in case material is released or spilled:
Use normal housekeeping procedures

  Waste Disposal:
Bury as a non-hazardous solid in sanitary landfill, or burn in a suitable
combustion chamber.

8. SPECIAL PROTECTIVE EQUIPMENT  
  Respiratory Protection: Use an approved respirator for nuisance dusts if levels exceed the PEL limit.

  Protective Gloves: Not Required.

  Eye Protection: Safety glasses recommended if airborne particles are produced.

  Other Protective Equip: None


Graphimator

Quick Links
Materials Offered And Specifications Materials Offered And Specifications
Standard Tolerances Standard Tolerances
Frequently Asked Questions Frequently Asked Questions
Request Quote Request Quote
Forms Forms

Special Announcement

F-Tool Tooling Solutions

Product Brochure
 
     
  Refer Us | Request for Quote | Fax Order Form | Feedback Form